Engineering

Engineering is the work. Not an add-on to the sale.

Every enclosure we propose is designed for one pool, one site and one climate. Here is how a project moves from a first brief to years of use — and what we check along the way.

Six steps, one team.

  1. 1

    Brief

    You tell us about the pool, the site and what makes the project unusual. Drawings, photos and a rough timeline are all useful.

  2. 2

    Site survey

    We assess the site: dimensions, levels, access, the house and the surroundings. Nothing is designed from assumptions.

  3. 3

    Concept

    We propose a shape, opening system and glazing, and agree them with you or your architect.

  4. 4

    Engineering and approval

    The structure is calculated for the exact location — snow, wind, span and use — and approved for the project.

  5. 5

    Manufacturing and installation

    The enclosure is built to order and installed on site, typically in days to weeks depending on span.

  6. 6

    Service

    Maintenance and support after installation, from people who know how the enclosure was built.

Site and climate

Calculated for your site — not a brochure average.

An enclosure on a Norwegian fjord, in an Alpine valley and in a city garden face very different conditions. We take them into account before anything is drawn, and the structure is approved for the project's location.

  • Snow — Snow load for the location and altitude, drifting against the house or terrain, and how snow slides off the glazing.
  • Wind — Exposure, open water, slopes and gaps between buildings that accelerate wind.
  • Altitude and temperature — Cold, condensation and the difference between indoor and outdoor temperature.
  • Drainage — Where rain and meltwater go — away from the rails, the pool and the house.
  • Surroundings — Trees, neighbouring buildings, sun path and the view you want to keep.
Engineered to Eurocode and local requirements, approved per project.
Heavy Canadian snow taught us to respect winter. The same discipline goes into every European enclosure.

Built to carry a winter, and to glide every day.

Profiles sized to the span

Aluminium profiles chosen for each span and load, joined by extruded aluminium-alloy brackets for lasting rigidity.

EPDM seals

Rot-proof seals between modules and around every panel edge.

Large-diameter wheels

Polyamide wheels with sealed stainless-steel bearings, 96, 120 or 160 mm.

Self-guiding sliding

Height compensation lets even large enclosures glide easily.

Two glazing materials, chosen per project.

Polycarbonate

  • Look: soft, diffused light.
  • Best for: privacy and an even, bright interior.
  • Inside: bright and calm.

Safety glass

  • Look: full transparency, a clear view out.
  • Best for: architecture-led projects where the view matters.
  • Inside: like sitting outdoors.

Both use the same slim aluminium profile — the choice is about light and look. We'll recommend the glazing that suits the span, the snow load and the way you want the pool to feel.

Opens the way you live.

By hand

Modules telescope on rails and slide easily, even on large enclosures.

Motorised

One-touch opening and closing for larger or heavier enclosures.

Sensors and smart home

Automated control and integration with home systems where the project calls for it.

Side entrances

Sliding side doors placed where you walk in from the house or garden.

Extended rails

Rails that run beyond the pool so the enclosure stacks clear of the water.

Three opening modes

Rolled out, centre opening or fully stacked aside.

See the opening modes →

Ready for the site before the enclosure arrives.

Most enclosures stand directly on the existing pool deck or terrace. Where a new base is needed, we tell you exactly what the rails require, so your builder can prepare it before installation day.

  • Existing pools — Most enclosures are installed directly on the existing deck or terrace.
  • New builds — The best results come when the enclosure is planned together with the pool and terrace.
  • Slopes and levels — Steps in the terrain are solved in the rail and foundation design, not left to chance.
  • On site — Installation typically takes days to weeks, depending on span.

Looked after by people who know how it was built.

After installation we're a call away for maintenance and support — checking seals, wheels and rails, adjusting the sliding and advising on cleaning and winter use.

For architects

Working on a design? Request sections, details and technical documents for your drawings.

Book an introduction call →

Have a site that needs real engineering?

Send us a brief with dimensions, photos or drawings. We review every brief personally and reply within 2 business days.